am i the only one who cant see the photos you are posting?
There are 2 small holes where the rear seat bolts too which are no big deal. I'm using 2 black hex screws to cover those up. The larger issues is where the grab rails attach. If you look at a parts diagram of the rear fender you will see 2 plastic pieces that bolt in and cover the area where the grab rails attach. The stock pieces have 2 giant holes to obviously mount the grab rails. If you look on some of the other Honda bikes with similar styling like the CTX700 they have 2 sets of plastic pieces available. One for a set of grab rails, and the other matches the curves of the fender with no mounting holes.I can see the photo. I think that the F6C looks good without the back seat. i think most people just ride by themselves usually so there should be plenty of people who would opt for this. Are there some holes in the rear fender or something where the rear seat used to be attached? Is there a way to get rid of those?
I don't know how well that would work out. The rear tire is only a 180 and the rear fender is extremely wide.but yea I could see the valk getting "bobbed" solo seat, chop the rear fender...
solo seat with back rest should look good.I'd like to see a solo seat with a back rest, or even a convertible seat like the showed us on their new NM4.
but yea I could see the valk getting "bobbed" solo seat, chop the rear fender...
any pictures of that custom seat?I've now got a custom seat from Rich's in Washington state. Removed the back seat and hand rails. I now have 4 large holes (where the rails attached), and the two small screw holes.
I'm not seeing any kits just yet.
If someone creative finds a solution, let me know.
any pictures of that custom seat?