Honda Valkyrie F6C Forum banner
1 - 3 of 3 Posts

·
Registered
Joined
·
2 Posts
Discussion Starter · #1 ·
Could someone with access to the Service manual please let me know what the front brake and clutch master cylinder bore sizes are?

Either that or let me know from where I could download the manual. :)

Thanks.
 

·
Registered
Joined
·
137 Posts
Clutch master cylinder
Cylinder I.D.
14.000 - 14.043 (0.5512 - 0.5529)
-
Piston 0 D.
13.957 - 13.984 (0.5495 - 0.5506)

Front
Brake disc thickness
4.4-4.6 (0.17-0.18)
3.5 (0.14)
Brake disc runout
-
0.30 (0.012)
Master cylinder I.D.
15.870 - 15.913 (0.6428 - 0.6265)
-
Master piston O.D.
15.827 - 15.854 (0.6231 - 0.4242)
-
Caliper cylinder I.D.
30.23-30.28(1.190-1.192)
-
Caliper pis-ton O.D.
30.148 - 30.198 (1.1869 - 1.1890)
-
Rear
Brake disc thickness
10.8-11.2 (0.43-0.44)
10.0 (0.39)
Brake disc runout
-
0.30(0.012)
Master cylinder I.D.
15.870 - 15.913 (0.6248 - 0.6265)
-
Master piston O.D.
15.827 - 15.854 (0.6231 - 0.6242)
-
Caliper cylinder I.D.
25.400 - 25.450 (1.0000 - 1.0020)
-
Caliper piston O.D.
25.318 - 25.368 (0.9968 - 0.9987)
 
1 - 3 of 3 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top