[chanesworth]

So I am trying to replace the right radiator shroud that got damaged when I dropped the bike. I removed the push pins and the top screw, but there appears to be another screw that I have to remove. However, I can't figure out how to get to the screw. I have attached a some photos so this can make a little more sense. For those of you that have removed the cowl can you please tell me what I am missing?

Thanks

 

[Thebrain]

If I remember correctly there are 3 screws in the cowl that would be located in the knee area as you sit on the bike. If you haven't removed that, you will need to.

 

[chanesworth]

If I remember correctly there are 3 screws in the cowl that would be located in the knee area as you sit on the bike. If you haven't removed that, you will need to.

Thank you. That makes sense

 

[Firefight100]

Here are the instructions from the manual.. Take your time and dont force anything.

 

[chanesworth]

Thank you for all of your help. I was able to get it off and changed.

 

[BobMoe]

I've seen some pretty messed-up covers in my day but I believe this is a new low finally Brute Force got the Black cover off here's a picture of it if you're trying to remove the left front panel. Grab the bottom and pull, hard.