Honda Valkyrie F6C Forum banner

1 - 3 of 3 Posts

·
Registered
Joined
·
2 Posts
Discussion Starter · #1 ·
G'day all, I have the 2015 F6C. I've fitted a Torq Master full exhaust system & K&N air filter. I also installed a Power Commander, but it got water damaged & I now need to replace it. I'm wondering whether there is any other options out there that anyone has used & can recommend? Ride on!
 

·
Registered
Joined
·
30 Posts
G'day all, I have the 2015 F6C. I've fitted a Torq Master full exhaust system & K&N air filter. I also installed a Power Commander, but it got water damaged & I now need to replace it. I'm wondering whether there is any other options out there that anyone has used & can recommend? Ride on!
Am I understanding this correctly that your power commander became water damaged???
 

·
Super Moderator
Joined
·
185 Posts
I used a Cobra FI2000 on a VTX1800 some years ago when I had added an intake and exhaust with very good results. The difference is that the Cobra unit is only additive -- that is, you can only increase fuel in three different 'pots' (idle, mid, and WOT) -- while the PC lets you increase or decrease fuel at various points. But for most implementations, especially where you've just leaned out the mixture by modifying the intake and exhaust, the FI2000 is perfectly adequate. No computer is needed, you adjust the pots with dials on the unit. Most times it needs just a slight tweak to the lower two pots to get it right. It made a huge difference on the VTX and I was very happy with it.

CLONK
 
1 - 3 of 3 Posts
Top