Honda Valkyrie F6C Forum banner

1 - 4 of 4 Posts

·
Registered
Joined
·
39 Posts
Discussion Starter #1
I have 13,500 mi or so on my 14 f6c. I have forks off bike and apart now. I am Putting stronger springs (1.20 kg mm for my weight)and new oil.The oil is very dirty and Only right leg has a damper cartridge.Planing on thicker oil too. Can someone with a Factory :)service manual verify oil level height and triple clamp pinch bolt torque for me?
 

·
Registered
Joined
·
95 Posts
Fork fluid level 5.2"
Assembly
Tighten botton tree 21 ft lbs
Fork cap 16 ft lbs
Top tree 16 ft lbs
 

·
Registered
Joined
·
39 Posts
Discussion Starter #3
The front end feel of bike is WAY better now with new springs,15 wt oil at higher level of 125mm SO much better that the next week I bought a new penskee rear shock with new spring! Traxxion dynamics is place I got the parts from,Front end is low cost end $135 with fork oil , Bike has dramatically better performance on smooth back country roads-No more grinding foot pegs either, better ground clearance
 
1 - 4 of 4 Posts
Top