Best Route to front

Once you take the seat off there is plenty of room under there.
I installed the fogs with a relay under the seat.Other than the seat and front cowl removal thats it and no problem getting the wires through.

I'm putting the Valkyrie adapter in with Show chromes so I end up with 5 wires in a harness I made. I just need to install it now and tap into the harness.

There is already a harness up there for fog light. And behind the left kick panel is the control harness. Just hook your switch up in there.

No harness for the fogs on the uk spec bikes which was a bit of a dissapointment when i took off the front cowl.

Paul Smith said:

No harness for the fogs on the uk spec bikes which was a bit of a dissapointment when i took off the front cowl.

Click to expand...

It is very hard to find. it is taped up down under the bracket if i remember right.

A video of the install

Firefight100
Thanks for the video but i had found already the cruismans garage videos before install.
Had a real good look around definitely no plugs or harness on the UK bike.I was surprised because i thought these would have come out of the factory with all the same wiring.