Honda Valkyrie F6C Forum banner
1 - 8 of 8 Posts

· Registered
Joined
·
17 Posts
I installed the 2” ROX Riser and it work great and make riding much comfy. Do not go for more than 2” to avoid issues with cables. Only thing you will need to reposition the screws that fix the odometer and you can do like I did as in photos attached.
 

Attachments

· Registered
Joined
·
184 Posts
Nice work. For folks here that may be interested can you provide more detail and better pictures of how you re-mounted the instrument cluster. I had to have a bracket made and if you can show us how you got past that I bet many more guys would do this mod.
 

· Registered
Joined
·
63 Posts
Nice work. For folks here that may be interested can you provide more detail and better pictures of how you re-mounted the instrument cluster. I had to have a bracket made and if you can show us how you got past that I bet many more guys would do this mod.
No Photo. But I did install the risers and the way I got around that bracket was to pull the Instrument Cluster back over the bars/riser and use the bracket holes on the bottom that previously aligned with the mounting holes on the lower risers to feed thin ZIP ties to tighten it up. The Zip ties are black and not really noticeable and work well.

You can adjust the Instrument Cluster to different positions if you like. Another local Valk owner has his pulled down in front to cover the little gap there is. I like mine up and over for now.

BTW I did have the Black Bike Master risers on and then opted for the Rox Risers. Bike Masters were good, but the Rox 2in risers were better.
 

· Registered
Joined
·
19 Posts
Question for those who installed the Rox risers. When I got my bars clamped in, there was a small gap between the Rox and it's top cap. It's tightened down and not budging, but want to see if others had a similar result...
 
1 - 8 of 8 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top