|Topic Review (Newest First)|
|05-22-2019 10:48 PM|
get on the dang thing and point it. don't bother stopping 'cept for gas and pee breaks. you can ride these bikes 10k miles new straight out of the box w/o so much as changing the oil. once. twice if your anal. just ride the dang thing. then write your story. Tools, wtf? poncho
|05-22-2019 07:04 AM|
|05-22-2019 05:56 AM|
|lucyjohn987||Found or still looking?|
|10-27-2017 12:47 PM|
|newsomebe||The only things I've ever needed are 8mm, 10mm, 12mm, 14mm, 17mm wrenches along with screwdriver with philips and 5mm hex bit.|
|10-25-2017 09:41 PM|
|Troy Davis||Thanks all. I have an entire tool shop, I just wanted to know which ones I should bring along. Didn't want to overpack.|
|10-25-2017 03:10 PM|
The bike is just getting warmed up in 1000 miles.
|10-25-2017 01:49 PM|
|Firefight100||Oh one other thing, I carry a can of the pressurized tire inflator sealer in the cubby hole of my valk.|
|10-25-2017 01:48 PM|
|Firefight100||Just swing by walmart or autozone. Pickup a set of metric allen wrenches, a set of metric wrenches and a 1/4 socket set and a 4 way screwdriver. Oil plug is 17mm. And a Flashlight. Very dependable bike and shouldn't give you any troubles.|
|10-24-2017 02:13 PM|
I'm prepping to fly down to Texas and ride my Valk back on a 1,000+ mile road trip. I'm going to bring along some tools for the ride.
What are the socket, wrench, and hex sizes for the common things I may need to access? Things like oil drain plug, crankcase breather, shaft plug, mirrors, seat, etc.